Plumber charges in India in 2026 range from ₹100 for a basic visit fee to ₹15,000+ for full bathroom installation. Most common jobs cost ₹150-2,500. Visit fees average ₹100-200 (often adjusted into the final bill). This is the complete price list for 50+ plumbing jobs across India, based on rates collected from 200+ verified plumbers.
Visit and inspection charges
| Service | Rate (₹) | Notes |
|---|
| Visit fee (basic inspection) | 100-200 | Adjusted into job if hired |
| Emergency call (after 8pm) | 300-600 | 1.5-2× day rate |
| Site survey for renovation | 300-500 | Includes written estimate |
| Diagnostic (find hidden leak) | 400-800 | Pressure testing extra |
Tap, faucet and basic plumbing
| Job | Rate (₹) | Time |
|---|
| Tap washer change | 100-200 | 15 min |
| Tap/faucet full replacement | 150-400 | 20-30 min |
| Mixer/diverter tap install | 300-700 | 30-45 min |
| Push-pull tap install | 250-500 | 20-30 min |
| Health faucet install | 200-400 | 15 min |
| Aerator clean/replace | 50-150 | 10 min |
| Stopcock replacement | 200-450 | 20 min |
Leak detection and pipe work
| Job | Rate (₹) | Time |
|---|
| Visible leak repair | 200-600 | 30-60 min |
| Concealed pipe leak (per point) | 500-1,500 | 1-3 hours |
| Pipe joint resealing | 150-400 | 20-30 min |
| New pipe line (per running meter) | 400-1,200 + material | Varies |
| CPVC line installation | 500-1,500/m | 1-2 hours/m |
| Galvanized pipe repair | 300-800 | 45-90 min |
| Drainage pipe replacement | 600-2,000 | 1-3 hours |
Bathroom fitting jobs
| Job | Rate (₹) | Time |
|---|
| Toilet seat replacement | 250-700 | 30-45 min |
| Full WC install | 1,500-3,500 | 2-3 hours |
| Wash basin install | 500-1,200 | 1 hour |
| Shower install | 400-1,000 | 45-60 min |
| Geyser install (storage) | 500-1,200 | 1-2 hours |
| Geyser install (instant) | 400-900 | 1 hour |
| Full bathroom fitting (basic) | 2,500-5,000 | 1-2 days |
| Full bathroom fitting (premium) | 6,000-15,000 | 2-4 days |
| Modular bathroom (turnkey) | 15,000-50,000+ | 5-15 days |
Drainage and unclogging
| Job | Rate (₹) | Time |
|---|
| Sink/basin unclog (manual) | 200-400 | 20-30 min |
| Sink unclog (with machine) | 400-900 | 30-60 min |
| Toilet unclog | 300-700 | 30-45 min |
| Floor drain unclog | 250-600 | 30 min |
| Main drain line clearing | 800-2,500 | 1-3 hours |
| Septic tank cleaning | 2,500-6,000 | 2-4 hours |
Water tank, motor and pump work
| Job | Rate (₹) | Time |
|---|
| Overhead tank cleaning | 500-1,500 | 1-2 hours |
| Underground tank cleaning | 1,500-4,000 | 3-6 hours |
| Water motor diagnose | 200-500 | 30 min |
| Motor repair (minor) | 500-1,500 | 1-2 hours |
| Motor rewinding | 1,500-4,000 | 4-8 hours |
| Submersible pump repair | 1,500-5,000 | 2-6 hours |
| Pressure pump install | 800-2,500 | 1-2 hours |
| Float valve replacement | 300-700 | 30-45 min |
How much does a plumber visit charge in India?
A plumber visit charge in India in 2026 averages ₹100-200 in tier-2/3 cities and ₹150-300 in metros (Mumbai, Delhi, Bangalore). Most plumbers adjust this into the final bill if you hire them for the actual job. Emergency visits (after 8pm or on Sundays) cost 1.5-2× the standard rate.
How much do plumbers charge per hour in India?
Plumber hourly rate in India is ₹150-400/hour for general work and ₹400-800/hour for specialist work (concealed plumbing, bathroom fitting). Most independent plumbers charge per-job, not per-hour — only managed platforms use hourly billing.
How much does a plumber charge for a leak in India?
A plumber charges ₹200-600 for a visible leak repair in India. Concealed leaks (inside walls or ceilings) cost ₹500-1,500 per detection point because they require pressure testing, wall opening, and resealing. Material costs are separate.
City-wise plumber charge multipliers
| City tier | Multiplier | Examples |
|---|
| Tier-1 metros | 1.20-1.25× | Mumbai, Delhi, Bangalore, Gurgaon |
| Tier-1 large | 1.10× | Pune, Hyderabad, Chennai |
| Tier-1 mature | 1.05× | Kolkata, Ahmedabad |
| Tier-2 growing | 0.95-1.0× | Jaipur, Indore, Bhopal |
| Tier-2 stable | 0.85-0.90× | Lucknow, Patna, Ranchi |
| Tier-3 small | 0.75-0.85× | District headquarters |
Apply the multiplier to base rates above. Example: ₹400 tap install in base rates → ₹500 in Mumbai (1.25×) → ₹340 in Lucknow (0.85×).
How to avoid being overcharged
- Get a quote on WhatsApp before visit (send a photo of the problem)
- Confirm visit fee separately from job cost
- Ask for material brand and price separately from labour
- Test the work before paying (run tap 10 min, check geyser heats, verify no drip)
- Check 3-5 verified reviews on the platform before calling
Are you a plumber? Set rates that work
These rates are what customers pay in 2026. If you're a plumber listing on Solve24, charging within ±15% of these rates positions you fairly — too low trains customers to undervalue you, too high loses bookings to verified competitors. Free listing at solve24.in/become-a-worker — 0% commission, customers call you directly.