# How much does gate repair cost in India?

> Gate repair in India (2026): weld repair for a cracked joint ₹600–₹1,500, gate hinge replacement ₹500–₹1,200, wheel/roller replacement (sliding gates) ₹800–₹1,800, full gate refurbishment (rust removal + weld + repaint) ₹2,500–₹8,000. A new gate is ₹300–₹850/sqft. Metros add 25–30%.

**Source:** [https://solve24.in/answers/gate-repair-cost-india](https://solve24.in/answers/gate-repair-cost-india)  
**Updated:** 2026-08-06  
**Trade:** welder  

## Answer

Gate repair pricing in India (2026) depends on fault. Simple weld repair (cracked joint at bar-to-frame connection or broken tie-bar): ₹600–₹1,500 per weld point. Portable-welding site visits are the norm — the welder brings a generator + welding rig to your gate.

Hinge repair or replacement (swing gates): ₹500–₹1,200 including new hinges + welding to the frame. Wheel/roller replacement for sliding gates: ₹800–₹1,800 (rollers ₹400–₹1,200 for the pair + labour). Full track replacement on a sliding gate: ₹2,500–₹5,000 depending on gate width.

Full gate refurbishment (rust removal + reweld + primer + paint) is ₹2,500–₹8,000 for a standard 6ft × 8ft gate. Includes stripping old paint/rust, welding weak points, applying anti-rust primer, and 2 coats of enamel or powder-coat. Extends gate life by 8–12 years.

A new gate is ₹300–₹850/sqft all-in (fabrication + install). Plain MS gate ₹300–₹450/sqft, decorative MS ₹450–₹600/sqft, stainless steel ₹600–₹850/sqft. Automatic gate motor add-on: ₹15,000–₹45,000 depending on brand and load capacity.

## Data

**Gate repair cost in India (2026)**

| Job | Base rate (₹) | Metro rate (₹) | Notes |
| --- | --- | --- | --- |
| Weld repair (per point) | 600–1,500 | 780–1,950 | Single crack or break |
| Hinge replacement (swing gate) | 500–1,200 | 650–1,560 | Both hinges |
| Wheel/roller replacement (sliding) | 800–1,800 | 1,040–2,340 | + rollers |
| Track replacement (sliding gate) | 2,500–5,000 | 3,250–6,500 | Depends on width |
| Lock repair / replacement | 400–1,200 | 520–1,560 | + lock cost |
| Full refurbishment (paint + weld) | 2,500–8,000 | 3,250–10,400 | For 6×8 gate |
| Powder coat (over refurb) | +₹100–200/sqft | +₹130–260/sqft | 10+ yr finish |
| New MS gate (all-in per sqft) | 300–600 | 390–780 | Plain / decorative |
| Gate automation (motor + install) | 15,000–45,000 | 19,500–58,500 | FAAC/Nice motors |

## Frequently asked

### How much does gate welding cost in India?

Simple weld repair is ₹600–₹1,500 per weld point (cracked joint, broken tie-bar). Full gate weld refurb + paint: ₹2,500–₹8,000. Metros +25–30%.

### How much does a new MS gate cost?

₹300–₹600/sqft for plain to decorative MS. A standard 8ft × 6ft gate (48 sqft): ₹14,400–₹28,800 all-in fabrication + install. Metros +25–30%.

### Is it cheaper to repair or replace an old gate?

If the frame is intact (only surface rust + weak welds): repair + refurbishment (₹2,500–₹8,000) extends life 8–12 years. If the frame is corroded through: new gate (₹14,000–₹28,000) is better long-term.

### What is the sliding gate wheel replacement cost?

₹800–₹1,800 for both rollers replaced + labour. Rollers themselves are ₹200–₹600 each (2 needed). Also check the track — if worn, add ₹2,500–₹5,000 for track replacement.

### What is automatic gate installation cost?

₹15,000–₹45,000 for motor + install (FAAC, Nice, Roger brands). Add ₹5,000–₹15,000 for remotes + safety sensors + battery backup. Total automation retrofit on an existing gate: ₹20,000–₹60,000.

## Related

- https://solve24.in/answers/welding-charges-in-india
- https://solve24.in/answers/window-grill-cost-per-sqft-india

---
Published by Solve24 — India's hyperlocal services marketplace. Direct-hire, zero commission.